這項工作旨在使用混合像素X射線探測器來表征超高劑量脈沖 (UHDpulse) 電子束。使用Timepix3 (TPX3) ASIC 芯片測量來自脈沖 15–23 MeV 電子束產生的二次輻射場的組成、空間、時間和光譜特性。面臨的挑戰是需要開發一款緊湊型探測器，可以在這種高通量短脈沖場上提取光譜和劑量信息。對于二次光束測量，將厚度為 1 和 8 cm 的 PMMA 板放置在電子束前面，脈沖持續時間為 3.5 μs。作者將 Timepix3 探測器（使用100 和 500 μm 厚度的硅sensor）放置在移動臺上，在光束軸的各個橫向位置采集數據。在 FLEXI 配置中使用探測器可實現適當?shù)脑粶y量和最小的自屏蔽。初步結果證明了該探測器具有測量以短脈沖形式傳遞的電子束的單個 UHD 脈沖的能力。此外，使用每個像素的兩條信號鏈可以在混合輻射場中估計距束芯不同距離處的粒子通量和散射劑量率 (DR)。

Stray radiation produced in FLASH electron beams characterized by the MiniPIX Timepix3 Flex detector

This work aims to characterize ultra-high dose rate pulses (UHDpulse) electron beams using the hybrid semiconductor pixel detector. The Timepix3 (TPX3) ASIC chip was used to measure the composition, spatial, time, and spectral characteristics of the secondary radiation fields from pulsed 15–23?MeV electron beams. The challenge is to develop a single compact detector that could extract spectrometric and dosimetric information on such high flux short-pulsed fields. For secondary beam measurements, PMMA plates of 1 and 8?cm thickness were placed in front of the electron beam, with a pulse duration of 3.5 μs. Timepix3 detectors with silicon sensors of 100 and 500?μm thickness were placed on a shifting stage allowing for data acquisition at various lateral positions to the beam axis. The use of the detector in FLEXI configuration enables suitable measurements in-situ and minimal self-shielding. Preliminary results highlight both the technique and the detector's ability to measure individual UHDpulses of electron beams delivered in short pulses. In addition, the use of the two signal chains per-pixel enables the estimation of particle flux and the scattered dose rates (DRs) at various distances from the beam core, in mixed radiation fields.

原文信息：Oancea, C., et al. "Stray radiation produced in FLASH electron beams characterized by the MiniPIX Timepix3 Flex detector." Journal of Instrumentation 17.01 (2022): C01003.

文中使用的是來自捷克Advacam公司的光子計數、混合像素X射線探測器 (點擊了解詳情)。